Supermicro X11SAE-M - Page 42

42
X11SAE-M User's Manual
SGPIO Headers
I-SGPIO1 and I-SGPIO2 (Serial General Purpose Input/Output) headers are used to
communicate with the enclosure management chip on the backplane.
SGPIO Header
Pin Denitions
Pin# Denition Pin# Denition
1 NC 2 NC
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 NC
NC = No Connection
Disk-On-Module Power Connector
The Disk-On-Module (DOM) power connector at JSD1 provides 5V power to a solid state
DOM storage device connected to one of the SATA ports. Refer to the table below for pin
denitions.
DOM Power
Pin Denitions
Pin# Denition
1 5V
2 Ground
3 Ground
MAC CODE
BIOS
LICENSE
DESIGNED IN USA
X11SAE-M
REV: 1.01
BAR CODE
S1
BIOS RESTORE
JF1
JPW2
JPW1
SP1
B3
JD1
JBT1
JTBT1
JSD1
JTPM1
JL1
JSTBY1
COM1
I-SATA3 I-SATA2
I-SATA7
I-SATA6
I-SATA1
I-SATA5
I-SATA0
I-SATA4
I-SGPIO1
I-SGPIO2
J23
LED3
LED1
FAN2
FAN1
FAN4
FAN5
JPME2
JPAC1
JWD1
JI2C1 JI2C2
JLED1
JPL2
JPL1
JVR1
MH12
MH9
MH10
MH11
FAN3
PCH
C236
SIO
BIOS
USB8/9(3.0)
USB10/11(3.0)
USB2/3 USB4/5
AUDIO FP
SLOT5 PCI 33MHz
PCH SLOT4 PCI-E 3.0 X4
CPU SLOT7 PCI-E 3.0 X16
HD AUDIO
UNB ECC/NON-ECC DDR4 DIMM REQUIRED
ALWAYS POPULATE BLUE SOCKET FIRST
M.2 PCI-E 3.0 X4
USB0/1
LAN2
USB6/7(3.0)
LAN1
HDMI/DP
DVI-D
DIMMB2
DIMMB1
DIMMA2
DIMMA1
CPU FAN
USB12/13(3.1)
CPU Socket LGA 1151
1
2
3
1. I-SGPIO1
2. I-SGPIO2
3. JSD1