Supermicro X11SAE-M - Page 54

54
X11SAE-M User's Manual
Onboard Power LED
LED1 is an Onboard Power LED. When this LED is lit, it means power is present on the
motherboard. In suspend mode, this LED will blink on and off. Be sure to turn off the system
and unplug the power cord(s) before removing or installing components.
Onboard Power LED Indicator
LED Color Denition
Off
System Off
(power cable not
connected)
Green System On
Standby Power LED
The 5V standby power LED is located at LED3. When this LED is on, the standby power is
connected. Unplug the power cable before removing or installing components. Refer to the
table below for the LED status.
MAC CODE
BIOS
LICENSE
DESIGNED IN USA
X11SAE-M
REV: 1.01
BAR CODE
S1
BIOS RESTORE
JF1
JPW2
JPW1
SP1
B3
JD1
JBT1
JTBT1
JSD1
JTPM1
JL1
JSTBY1
COM1
I-SATA3
I-SATA2
I-SATA7
I-SATA6
I-SATA1
I-SATA5
I-SATA0
I-SATA4
I-SGPIO1
I-SGPIO2
J23
LED3
LED1
FAN2
FAN1
FAN4
FAN5
JPME2
JPAC1
JWD1
JI2C1 JI2C2
JLED1
JPL2
JPL1
JVR1
MH12
MH9
MH10
MH11
FAN3
PCH
C236
SIO
BIOS
USB8/9(3.0)
USB10/11(3.0)
USB2/3 USB4/5
AUDIO FP
SLOT5 PCI 33MHz
PCH SLOT4 PCI-E 3.0 X4
CPU SLOT7 PCI-E 3.0 X16
HD AUDIO
UNB ECC/NON-ECC DDR4 DIMM REQUIRED
ALWAYS POPULATE BLUE SOCKET FIRST
M.2 PCI-E 3.0 X4
USB0/1
LAN2
USB6/7(3.0)
LAN1
HDMI/DP
DVI-D
DIMMB2
DIMMB1
DIMMA2
DIMMA1
CPU FAN
USB12/13(3.1)
CPU Socket LGA 1151
1
1. Onboard Power LED
2. Standby Power LED
2
Standby Power LED Indicator
LED Settings
LED Color Denition
Off
5V Standby Power
Off (power cable
not connected)
Green
Standby Power
cable connected