17
Chapter 1: Introduction
Motherboard Features
Dimensions
•
9.6" (W) x 9.6" (L) (243.8mm x 243.8mm)
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specications for proper CPU TDP sizing.
Note 2: For IPMI conguration instructions, please refer to the Embedded IPMI Con-
guration User's Guide available at http://www.supermicro.com/support/manuals/.
Note 3: Starting in 2020, Supermicro ships standard products with a unique password
that can be found on a label on the motherboard. For products shipped before 2020,
the manufacturer default username is ADMIN and the password is ADMIN. For gen-
eral documentation and information on IPMI, please visit our website at: https://www.
supermicro.com/en/solutions/management-software/bmc-resources.
To Next Page
Loading...
