Supermicro X11SCH-F - LED Indicators

56
Super X11SCH-F/-LN4F User's Manual
DESIGNED IN USA
X11SCH-F
REV:1.01
IPMI CODE
BAR CODE
MAC CODE
MEGERAC
LICENSE
1
+
+
Intel
C246
ASpeed
AST2500
JSTBY1
JTPM1
JPWR1
JF1
I-SATA6 I-SATA7
I-SATA0
I-SATA4
I-SATA5
I-SATA3
I-SATA2
I-SATA1
I-SGPIO2 I-SGPIO1
JPWR2
JD1
JPI2C1
FANB
FAN4
FAN3
FAN2
FAN1
FANA
JIPMB1
JSD1
JSD2
JPG1
JPME2
JWD1
BT1
JLD2
JOH1
JL1
SP1
MH12
MH11
MH10
JUIDB1
LEDSSD2
LEDSSD1
LE1
LEDBMC
LEDPWR
JBT1
MH13
JLD1
M.2-P_2
M.2-P_1
LAN2/LAN4
USB8(3.0)
USB9/10(3.0)
USB4/5
USB2/3
COM1
USB0/1
IPMI_LAN
USB6/7(3.0)
LAN1/LAN3
VGA
CPU SLOT6 PCI-E 3.0 X8(IN X16)
CPU SLOT5 PCI-E 3.0 X8
CPU
NMI
JF1
LED PWR
X
LED HDD
NIC
LED UID
2
NIC
1
RST
PWR ON
FAIL
PS
COM2
DIMMA1 DIMMA2 DIMMB1 DIMMB2
Intel
i210
Intel
i210
2.9 LED Indicators
1. LAN1/LAN3 LED
2. LAN2/LAN4 LED
3. UID LED
1
UID LED
LED Indicator
LED Color Denition
Blue: On Unit Identied
Unit ID LED
A rear UID LED indicator (LE1) is located near the UID switch on the back I/O panel. This
UID indicator provides easy identication of a system unit that may need service.
23
LAN LEDs
Two LAN ports (LAN1, LAN2) are located on the back I/O panel of X11SCH-F, while
X11SCH-LN4F has four ports (LAN1 ~ LAN4). Each Ethernet LAN port has two LEDs. The
yellow LED indicates activity, while the other Link LED may be green, amber, or off to indicate
the speed of the connection. Refer to the tables below for more information.
LAN Activity LED (Right)
LED State
Color Status Denition
Yellow Flashing Active
LAN Link LED (Left)
LED State
LED Color Denition
Off No Connection/10 Mbps
Amber 1 Gbps
Green 100 Mbps