3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X11SCH-F/-LN4F motherboard.
About This Motherboard
The Super X11SCH-F/-LN4F motherboard supports an Intel® Xeon® E-2200/2100, 9th/8th
Generation Core i3, Pentium, and Celeron (Socket H4 - LGA 1151) series processor with
up to eight cores and a thermal design power (TDP) of up to 95W. Built with the Intel C246
chipset, this motherboard supports 4-DIMM DDR4 ECC unbuffered (UDIMM) memory (2-
DIMM per channel) with speeds of up to 2666MHz. It features PCI-Express 3.0 slots, SATA
3.0 and 1GbE LAN ports, a Trusted Platform Module (TPM) header, and two M.2 connectors
with Intel Optane Memory support. The X11SCH-F/-LN4F is optimized for high-performance
computing supporting many onboard features that address the needs of next generation server
applications. Please note that this motherboard is intended to be installed and serviced by
professional technicians only. For processor/memory updates, please refer to our website at
http://www.supermicro.com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered while performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for proper system setup.
To Next Page
Loading...
