Supermicro X11SCH-F - Page 37

37
Chapter 2: Installation
DESIGNED IN USA
X11SCH-F
REV:1.01
IPMI CODE
BAR CODE
MAC CODE
MEGERAC
LICENSE
1
+
+
Intel
C246
ASpeed
AST2500
JSTBY1
JTPM1
JPWR1
JF1
I-SATA6 I-SATA7
I-SATA0
I-SATA4
I-SATA5
I-SATA3
I-SATA2
I-SATA1
I-SGPIO2 I-SGPIO1
JPWR2
JD1
JPI2C1
FANB
FAN4
FAN3
FAN2
FAN1
FANA
JIPMB1
JSD1
JSD2
JPG1
JPME2
JWD1
BT1
JLD2
JOH1
JL1
SP1
MH12
MH11
MH10
JUIDB1
LEDSSD2
LEDSSD1
LE1
LEDBMC
LEDPWR
JBT1
MH13
JLD1
M.2-P_2
M.2-P_1
LAN2/LAN4
USB8(3.0)
USB9/10(3.0)
USB4/5
USB2/3
COM1
USB0/1
IPMI_LAN
USB6/7(3.0)
LAN1/LAN3
VGA
CPU SLOT6 PCI-E 3.0 X8(IN X16)
CPU SLOT5 PCI-E 3.0 X8
CPU
NMI
JF1
LED PWR
X
LED HDD
NIC
LED UID
2
NIC
1
RST
PWR ON
FAIL
PS
COM2
DIMMA1 DIMMA2 DIMMB1 DIMMB2
Intel
i210
Intel
i210
1. UID Switch
2. UID LED
12
Unit Identier Switch/UID LED Indicator
A Unit Identier (UID) switch and an LED indicator are located on the motherboard. The UID
switch is located at JUIDB1, which is next to the VGA port on the back panel. The UID LED
(LE1) is located next to the UID switch. When you press the switch, the LED will be turned
on, which provides easy identication of a system unit that may be in need of service. Press
the switch again to turn off the LED indicator.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website: https://www.
supermicro.com/support/manuals/
UID Switch
Pin Denitions
Pin# Denition
1 GND
2 GND
3 Button In
4 Button In
UID LED
Pin Denitions
Color Status
Blue: On Unit Identied