Supermicro X11SCH-F - Page 46

46
Super X11SCH-F/-LN4F User's Manual
DESIGNED IN USA
X11SCH-F
REV:1.01
IPMI CODE
BAR CODE
MAC CODE
MEGERAC
LICENSE
1
+
+
Intel
C246
ASpeed
AST2500
JSTBY1
JTPM1
JPWR1
JF1
I-SATA6 I-SATA7
I-SATA0
I-SATA4
I-SATA5
I-SATA3
I-SATA2
I-SATA1
I-SGPIO2 I-SGPIO1
JPWR2
JD1
JPI2C1
FANB
FAN4
FAN3
FAN2
FAN1
FANA
JIPMB1
JSD1
JSD2
JPG1
JPME2
JWD1
BT1
JLD2
JOH1
JL1
SP1
MH12
MH11
MH10
JUIDB1
LEDSSD2
LEDSSD1
LE1
LEDBMC
LEDPWR
JBT1
MH13
JLD1
M.2-P_2
M.2-P_1
LAN2/LAN4
USB8(3.0)
USB9/10(3.0)
USB4/5
USB2/3
COM1
USB0/1
IPMI_LAN
USB6/7(3.0)
LAN1/LAN3
VGA
CPU SLOT6 PCI-E 3.0 X8(IN X16)
CPU SLOT5 PCI-E 3.0 X8
CPU
NMI
JF1
LED PWR
X
LED HDD
NIC
LED UID
2
NIC
1
RST
PWR ON
FAIL
PS
COM2
DIMMA1 DIMMA2 DIMMB1 DIMMB2
Intel
i210
Intel
i210
1. TPM Header
2. M.2 Slot (M.2-P_1)
3. M.2 Slot (M.2-P_2)
1
Trusted Platform Module Header
Pin Denitions
Pin# Denition Pin# Denition
1 +3.3V 2 SPI_CS#
3 RESET# 4 SPI_MISO
5 SPI_CLK 6 GND
7 SPI_MOSI 8 NC
9 +3.3V Stdby 10 SPI_IRQ#
M.2 Slot
The X11SCH-F/-LN4F motherboard has two M.2 slots. M.2 was formerly known as Next
Generation Form Factor (NGFF) and serves to replace mini PCI-E. M.2 allows for a variety of
card sizes, increased functionality, and spatial efciency. The M.2 socket on the motherboard
supports PCI-E 3.0 x4 (32 Gb/s) SSD cards in a 2280 / 22110 form factor.
2
TPM/Port 80 Header
A Trusted Platform Module (TPM)/Port 80 header is located at JTPM1 to provide TPM support
and Port 80 connection. Use this header to enhance system performance and data security.
Refer to the table below for pin denitions. Please go to the following link for more information
on the TPM: http://www.supermicro.com/manuals/other/TPM.pdf.
3