Supermicro X11SCH-F - Page 52

52
Super X11SCH-F/-LN4F User's Manual
DESIGNED IN USA
X11SCH-F
REV:1.01
IPMI CODE
BAR CODE
MAC CODE
MEGERAC
LICENSE
1
+
+
Intel
C246
ASpeed
AST2500
JSTBY1
JTPM1
JPWR1
JF1
I-SATA6 I-SATA7
I-SATA0
I-SATA4
I-SATA5
I-SATA3
I-SATA2
I-SATA1
I-SGPIO2 I-SGPIO1
JPWR2
JD1
JPI2C1
FANB
FAN4
FAN3
FAN2
FAN1
FANA
JIPMB1
JSD1
JSD2
JPG1
JPME2
JWD1
BT1
JLD2
JOH1
JL1
SP1
MH12
MH11
MH10
JUIDB1
LEDSSD2
LEDSSD1
LE1
LEDBMC
LEDPWR
JBT1
MH13
JLD1
M.2-P_2
M.2-P_1
LAN2/LAN4
USB8(3.0)
USB9/10(3.0)
USB4/5
USB2/3
COM1
USB0/1
IPMI_LAN
USB6/7(3.0)
LAN1/LAN3
VGA
CPU SLOT6 PCI-E 3.0 X8(IN X16)
CPU SLOT5 PCI-E 3.0 X8
CPU
NMI
JF1
LED PWR
X
LED HDD
NIC
LED UID
2
NIC
1
RST
PWR ON
FAIL
PS
COM2
DIMMA1 DIMMA2 DIMMB1 DIMMB2
Intel
i210
Intel
i210
1. I-SATA0
2. I-SATA1
3. I-SATA2
4. I-SATA3
5. I-SATA4
6. I-SATA5
7. I-SATA6
8. I-SATA7
1
2
SATA Ports
The X11SCH-F/-LN4F has eight SATA 3.0 ports (I-SATA0 ~ I-SATA7) supported by the Intel
C246 chipset. These SATA ports support RAID 0, 1, 5, and 10. SATA ports provide serial-link
signal connections, which are faster than the connections of Parallel ATA.
Note: Supermicro SuperDOMs are yellow SATADOM connectors with power pins built
in and do not require separate external power cables. These connectors are backwards
compatible with non-Supermicro SATADOMS that require an external power supply.
87
6
5
4
3