3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X11SCL-F motherboard.
About This Motherboard
The Super X11SCL-F motherboard supports an Intel® Xeon® E-2200/2100, 9th/8th
Generation Core i3, Pentium, and Celeron (Socket H4 - LGA 1151) series processor with up
to six cores and a thermal design power (TDP) of up to 95W. Built with the Intel C242 chipset,
this motherboard supports 4-DIMM DDR4 ECC unbuffered (UDIMM) memory (2-DIMM per
channel) with speeds of up to 2666MHz. It features PCI-Express 3.0 slots, SATA 3.0 and
dual 1GbE LAN ports, a Trusted Platform Module (TPM) header, and a M.2 connector with
Intel Optane Memory support. The X11SCL-F is optimized for entry-level general purpose
computing with three PCI-Express expansion slots, which is ideal for cloud storage. Please
note that this motherboard is intended to be installed and serviced by professional technicians
only. For processor/memory updates, please refer to our website at http://www.supermicro.
com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered while performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for proper system setup.
To Next Page
Loading...
