Supermicro X11SCL-F - Page 87

Chapter 4: BIOS
87
Onboard LAN Option ROM Type
Use this feature to select which rmware type to be loaded for onboard LAN ports. The
options are Legacy and EFI.
*If the feature above is set to Legacy, the following LAN ports will be listed and become
available for conguration:
Onboard LAN1 ~ LAN2 Option ROM
Use this feature to select which rmware function to be loaded for the specied onboard LAN
port at system boot. The options are Disabled, PXE, and iSCSI*.
*iSCSI is only supported on Onboard LAN1. The default setting for Onboard LAN1 is
PXE.
Network Stack
Select Enabled to enable Preboot Execution Environment (PXE) or Unied Extensible Firm-
ware Interface (UEFI) for network stack support. The options are Disabled and Enabled.
*If the feature above is set to Enabled, the following settings will become available for
conguration:
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
IPSECCerticate
Internet Protocol Security (IPSEC) offers a secure connection for remote computers using a
secure tunnel. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this feature to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0
.
Media Detect Count
Use this feature to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.