Supermicro X11SCL-IF

To Next Page

To Previous Page

Super X11SCL-IF User's Manual

Motherboard Features

Dimensions

• 6.7" (W) x 6.7" (L) (170.2mm x 170.2mm)

Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and

heatsink cooling restrictions. For proper thermal management, please check the chas-

sis and heatsink specications for proper CPU TDP sizing.

Note 2: For IPMI conguration instructions, please refer to the Embedded IPMI Con-

guration User's Guide available at http://www.supermicro.com/support/manuals/.

Note 3: It is strongly recommended that you change BMC log-in information upon ini-

tial system power-on. The manufacture default username is ADMIN and the password

is ADMIN. For proper BMC conguration, please refer to http://www.supermicro.com.

Supermicro X11SCL-IF - Page 16