3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users. It
provides information for the installation and use of the X11SCM-LN8F/-F and X11SCL-LN4F
motherboard.
About This Motherboard
The Super X11SCM-LN8F/-F and X11SCL-LN4F motherboards supports
an Intel® Xeon® E-2200/2100, 9th/8th Generation Core i3, Pentium, and Celeron
(Socket H4 - LGA 1151) processor with up to eight cores and a thermal design power (TDP)
of up to 95W. Built with the Intel C242 (X11SCL-LN4F) / C246 (X11SCM-LN8F/-F) chipset,
this motherboard supports 4-DIMM DDR4 ECC unbuffered (UDIMM) memory (2-DIMM
per channel) with speeds of up to 2666MHz. It features PCI-Express 3.0 slots, SATA 3.0
ports, eight 1GbE LAN ports, and a Trusted Platform Module (TPM) header. In addition, the
motherboard comes with two M.2 connectors that support SATA and/or PCI-E connections,
and Intel Optane Memory. It is optimized for high-performance computing that address the
needs of next generation server applications and is ideal for networking appliance, web-
hosting, and server platforms. Please note that this motherboard is intended to be installed
and serviced by professional technicians only. For processor/memory updates, please refer
to our website at http://www.supermicro.com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered while performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for proper system setup.
To Next Page
Loading...
Need help?
General
