Supermicro X11SCM-LN8F - Page 36

36
Super X11SCM-LN8F/-F and X11SCL-LN4F User's Manual
IPMI CODE
+
+
X11SCL-LN4F
REV:1.00
MAC CODE
BAR CODE
DESIGNED IN USA
BIOS LICENSE
LAN4/8
LAN3/7
LAN2/6
LAN1/5
JPL4
JPL8
JPL3
JPL7
JPL2
JPL6
JPL1
JPL5
FAN4
COM1
IPMI_LAN
USB0/1
USB4/5
(3.0)
VGA
JLD2
JLD1
JPW2
JPW1
FAN2
FAN1
LED_PWR_SB
X11SCM-LN8F/-F
Intel
C246 / C242
2280
22110
2280
BMC_HB_LED
LED4
JUIDB1
JWD1
JPME2
JPG1
JBAT1
SP1
USB2/3
JTPM1
I-SGPIO1
I-SGPIO2
JBT1
I-SATA3
I-SATA2
I-SATA1
I-SATA0
I-SATA5
I-SATA4
JL1
FANB
FANA
JSD2JSD1
JSTBY1
USB8
(3.0)
JLED1
JF1
FAN3
PWR_LED
ASpeed
AST2500
M.2-P_1
M.2-H_2
JD1
USB6/7 (3.0)
CPU
DIMMA1
DIMMA2
DIMMB1
DIMMB2
22110
NMI
JF1
LED
PWR
X
LED
HDD
NIC
LED
UID
2
NIC
1
RST
PWR
ON
FAIL
PS
CPU SLOT6 PCI-E 3.0 X16
Intel
i210
Intel
i210
VGA Port
The onboard VGA port is located next to the IPMI LAN port and USB0/1 ports on the back
I/O panel. Use this connection for VGA display.
1. VGA Port
2. UID Switch
3. UID LED
1
32
Unit Identier Switch/UID LED Indicator
A Unit Identier (UID) switch and an LED indicator are located on the motherboard. The UID
switch is located at UID-SW, which is next to the LAN port on the back panel. The UID LED
(LED4) is located in front of the UID switch. When you press the switch, the LED will be
turned on, which provides easy identication of a system unit that may be in need of service.
Press the switch again to turn off the LED indicator.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website: https://www.
supermicro.com/support/manuals/
UID Switch
Pin Denitions
Pin# Denition
1 GND
2 GND
3 Button In
4 GND
UID LED
Pin Denitions
Color Status
Blue: On Unit Identied