Supermicro X11SCM-LN8F - Power Button; Reset Button

40
Super X11SCM-LN8F/-F and X11SCL-LN4F User's Manual
Reset Button
Pin Denitions (JF1)
Pin# Denition
3 Reset
4 GND
Power Button
Pin Denitions (JF1)
Pin# Denition
1 Signal
2 GND
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting
both pins will power on/off the system. This button can also be congured to function as a
suspend button (with a setting in the BIOS - see Chapter 4). To turn off the power when the
system is in suspend mode, press the button for four seconds or longer. Refer to the table
below for pin denitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin denitions.
Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
UID SW
3.3V Stby
Ground
19
X
Ground
X
3.3V Stby
20
1 2
Ground
Power Fail LED
NIC2 Active LED
NMI
3.3V
3.3V
OH/Fan Fail LED
1. PWR Button
2. Reset Button
1
2