Supermicro X11SCM-LN8F - TPM;Port 80 Header; M.2 Slot

48
Super X11SCM-LN8F/-F and X11SCL-LN4F User's Manual
IPMI CODE
+
+
X11SCL-LN4F
REV:1.00
MAC CODE
BAR CODE
DESIGNED IN USA
BIOS LICENSE
LAN4/8
LAN3/7
LAN2/6
LAN1/5
JPL4
JPL8
JPL3
JPL7
JPL2
JPL6
JPL1
JPL5
FAN4
COM1
IPMI_LAN
USB0/1
USB4/5
(3.0)
VGA
JLD2
JLD1
JPW2
JPW1
FAN2
FAN1
LED_PWR_SB
X11SCM-LN8F/-F
Intel
C246 / C242
2280
22110
2280
BMC_HB_LED
LED4
JUIDB1
JWD1
JPME2
JPG1
JBAT1
SP1
USB2/3
JTPM1
I-SGPIO1
I-SGPIO2
JBT1
I-SATA3
I-SATA2
I-SATA1
I-SATA0
I-SATA5
I-SATA4
JL1
FANB
FANA
JSD2JSD1
JSTBY1
USB8
(3.0)
JLED1
JF1
FAN3
PWR_LED
ASpeed
AST2500
M.2-P_1
M.2-H_2
JD1
USB6/7 (3.0)
CPU
DIMMA1
DIMMA2
DIMMB1
DIMMB2
22110
NMI
JF1
LED
PWR
X
LED
HDD
NIC
LED
UID
2
NIC
1
RST
PWR
ON
FAIL
PS
CPU SLOT6 PCI-E 3.0 X16
Intel
i210
Intel
i210
M.2 Slot
The X11SCM-LN8F/-F motherboard has two M.2 slots, while X11SCL-LN4F has one. M.2
was formerly known as Next Generation Form Factor (NGFF) and serves to replace mini
PCI-E. M.2 allows for a variety of card sizes, increased functionality, and spatial efciency.
The hybrid M.2-H_2 slot supports PCI-E 3.0 x4 SSD cards in a 2280/22110 form factor, or
SATA 3.0. However, the X11SCL-LN4F only supports PCI-E 3.0 x4 on this slot. The M.2-P_1
slot, available only on the X11SCM-LN8F/-F, supports PCI-E 3.0 x4.
3
1. TPM Header
2. PCI-E Only M.2 Slot
3. Hybrid (PCI-E or SATA)
M.2 Slot
1
2
Trusted Platform Module Header
Pin Denitions
Pin# Denition Pin# Denition
1 +3.3V 2 SPI_CS#
3 RESET# 4 SPI_MISO
5 SPI_CLK 6 GND
7 SPI_MOSI 8 NC
9 +3.3V Stdby 10 SPI_IRQ#
TPM/Port 80 Header
A Trusted Platform Module (TPM)/Port 80 header is located at JTPM1 to provide TPM support
and Port 80 connection. Use this header to enhance system performance and data security.
Refer to the table below for pin denitions. Please go to the following link for more information
on the TPM: http://www.supermicro.com/manuals/other/TPM.pdf.