Supermicro X11SCM-LN8F - Page 58

58
Super X11SCM-LN8F/-F and X11SCL-LN4F User's Manual
Onboard Power LED
The Onboard Power LED is located at PWR_LED on the motherboard. When this LED is on,
the system is on. Be sure to turn off the system before removing or installing components.
Refer to the table below for more information.
Onboard Power LED Indicator
LED Color Denition
Off System Off
Green System On
IPMI CODE
+
+
X11SCL-LN4F
REV:1.00
MAC CODE
BAR CODE
DESIGNED IN USA
BIOS LICENSE
LAN4/8
LAN3/7
LAN2/6
LAN1/5
JPL4
JPL8
JPL3
JPL7
JPL2
JPL6
JPL1
JPL5
FAN4
COM1
IPMI_LAN
USB0/1
USB4/5
(3.0)
VGA
JLD2
JLD1
JPW2
JPW1
FAN2
FAN1
LED_PWR_SB
X11SCM-LN8F/-F
Intel
C246 / C242
2280
22110
2280
BMC_HB_LED
LED4
JUIDB1
JWD1
JPME2
JPG1
JBAT1
SP1
USB2/3
JTPM1
I-SGPIO1
I-SGPIO2
JBT1
I-SATA3
I-SATA2
I-SATA1
I-SATA0
I-SATA5
I-SATA4
JL1
FANB
FANA
JSD2JSD1
JSTBY1
USB8
(3.0)
JLED1
JF1
FAN3
PWR_LED
ASpeed
AST2500
M.2-P_1
M.2-H_2
JD1
USB6/7 (3.0)
CPU
DIMMA1
DIMMA2
DIMMB1
DIMMB2
22110
NMI
JF1
LED
PWR
X
LED
HDD
NIC
LED
UID
2
NIC
1
RST
PWR
ON
FAIL
PS
CPU SLOT6 PCI-E 3.0 X16
Intel
i210
Intel
i210
1. Onboard Power LED
2. Standby Power LED
1
2
Standby Power LED (LED_PWR_SB)
An onboard Standby Power LED is lcoated at LED_PWR_SB. When this LED is on, the AC
power cable is connected and the power supply hard switch is on. Make sure to disconnect
the power cable before removing or installling any component.
Standby Power LED Indicator
LED Status Denition
Off
Power Supply is
Off (Hard Switch)
On
Power Supply is
On (Hard Switch)