Supermicro X11SCM-LN8F - Serial Port 1 Configuration

Super X11SCM-LN8F/-F and X11SCL-LN4F User's Manual
78
Peer Memory Write Enable
Use this feature to enable or disable peer memory write. The options are Disabled or
Enabled.
M.2-P_1 / M.2-H_2 (**Not available on X11SCL-LN4F)
M.2-P_1 / M.2-H_2** ASPM Support
This feature controls the Active State Power Management (ASPM) setting. The op-
tions are Disabled, L0s, L1, L0sL1, and Auto.
M.2-P_1 / M.2-H_2** L1 Substates
Use this feature to congure the PCI Express L1 Substates. The options are Dis-
abled, L1.1, and L1.1 & L1.2.
M.2-P_1 / M.2-H_2** PCIe Speed
Use this feature to select the PCI Express port speed. The options are Auto, Gen1,
Gen2, and Gen3.
Port 61h Bit-4 Emulation
Select Enabled to enable the emulation of Port 61h bit-4 toggling in System Management
Mode (SMM). The options are Disabled and Enabled.
PCIE PLL SSC
Use this feature to enable PCI-E phase-locked loop (PLL) spread spectrum clocking (SSC).
The options are Enabled and Disabled.
SuperIOConguration
The following Super IO information will display:
• Super IO Chip AST2500
SerialPort1Conguration
This submenu allows the user to congure the settings of Serial Port 1.
Serial Port 1
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This item displays the status of a serial port specied by the user.