Supermicro X11SCM-LN8F - Page 88

Super X11SCM-LN8F/-F and X11SCL-LN4F User's Manual
88
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select On-
board to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are Onboard and Offboard.
Onboard Video Option ROM
Use this feature to select the onboard video rmware type to be loaded. The options are
Legacy and EFI.
NVMe Firmware Source
Use this feature to select the NVMe rmware to support booting. The options are Vendor
DenedFirmware and AMI Native Support. The default option, Vendor Dened Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
PCIe/PCI/PnPConguration
CPU SLOT6 PCI-E 3.0 X16 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
M.2-P_1 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
M.2-H_2 OPROM
(Not available on X11SCL-LN4F)
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Use this feature to select which rmware type to be loaded for onboard LAN ports. The
options are Legacy and EFI.
*If the feature above is set to Legacy, the following LAN ports will be listed and become
available for conguration:
Onboard LAN1 ~ LAN2 (X11SCM-F) / Onboard LAN1 ~ LAN4 (X11SCL-LN4F) /
Onboard LAN1 ~ LAN8 (X11SCM-LN8F) Option ROM Type
Use this feature to select which rmware function to be loaded for the specied onboard LAN
port at system boot. The options are Disabled, PXE, and iSCSI*.
*iSCSI is only supported on Onboard LAN1. The default setting for Onboard LAN1 is
PXE.