Supermicro X11SCQ-L - Page 103

Chapter 4: BIOS
103
• HDD Master Pwd Status
Set User Password
Use this feature to create a new user password for the HDD.

Secure Boot
System Mode
Secure Boot
Attempt Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The options
are Disabled and Enabled.
Secure Boot Mode
This feature allows the user to select the desired secure boot mode for the system. The
options are Standard and Customized.
*If Secure Boot Mode is set to Customized, Key Management features are available
for conguration:
CSM Support
This feature is for manufacturing debugging purposes. The options are Disabled and
Enabled.
Key Management
This submenu allows the user to congure the following Key Management settings.
Vendor Keys
Provision Factory Default Keys
Select Enabled to install the default Secure Boot keys set by the manufacturer. The options
are Disabled and Enabled.

Install Factory Default keys
Select Yes to install the default settings for all keys. The options are Yes and No.

Reset to Setup Mode
Select Yes to delete all Secure Boot key databases and force the system to Setup Mode.
The options are Yes and No.
Save all Secure Boot variables
This feature allows the user to decide if all secure boot variables should be saved.