Supermicro X11SCQ-L - Quick Reference Table

12
Super X11SCQ/-L User's Manual
Quick Reference Table
Jumper Description Default Setting
JAT1 ATX/AT Mode Pins 1-2 (ATX Mode)
JBT1 CMOS Clear Open (Normal)
JPAC1 Audio Enable Pins 1-2 (Enable)
JPL1, JPL2 LAN1/LAN2 Enable/Disable Pins 1-2 (Enable)
JPME2 Manufacturing Mode Pins 1-2 (Normal)
JPT1
Onboard TPM Enable/Disable
(not available on X11SCQ-L)
Pins 1-2 (Enable)
JWD1 Watch Dog Timer Pins 1-2 (Reset)
Connector Description
AUDIO FP Front Panel Audio Header
B3 Onboard Battery
COM1 COM1 Header
COM2 COM2 Header
COM3/4 COM3 and COM4 Headers
COM5/6 COM5 and COM6 Headers
DVI-D Digital Visual Interface Port (Digital only)
eDP Embedded DisplayPort
FAN1 - FAN4 CPU/System Fan Headers (FAN4: CPU Fan)
HD AUDIO Rear Audio Ports
HDMI/DP High Denition Multimedia Interface/DisplayPort
I-SATA0 - I-SATA5 SATA 3.0 Ports (SATA4 and SATA5 are not available on X11SCQ-L)
JD1 Speaker/Buzzer (Pins 1-4: Speaker, Pins 3-4: Buzzer)
JF1 Front Control Panel Header
JGP1 General Purpose I/O Header
JL1 Chassis Intrusion Header
JLED1 3-pin Power LED Indicator Header
JPW1 24-pin ATX Main Power Connector (Required)
JPW2 +12V 8-pin CPU Power Connector (Required)
JSD1 SATA DOM Power Header
JSMB1 System Management Bus Header
JSTBY1 5V Standby Power Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
KB/MOUSE Keyboard and Mouse Connector
LAN1, LAN2 Gigabit Ethernet (RJ45) Port
M.2 M.2 M-Key PCIE3 Connector (not available on X11SCQ-L)
Note: The table above is continued on the next page.