Supermicro X11SCQ-L - Page 3

3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X11SCQ/-L motherboard.
About This Motherboard
The X11SCQ/-L motherboard supports an Intel 8th Gen Core i3/i5/i7, Pentium, or Celeron
processor in an LGA1151 socket. The X11SCQ/-L provides maximum performance with the
latest Intel CPU architecture, up to 32 or 64GB DDR4-2666 memory, HDMI 2.0, DisplayPort,
DVI-D, M.2, dual Gigabit LAN, USB 3.1 Gen 1/2, PCI-E 3.0 x16 expandability, and is optimized
for medical, surveillance, digital signage, DVR/NVR, POS, and ofce server applications.
Please note that this motherboard is intended to be installed and serviced by professional
technicians only. For processor and memory updates, please refer to our website at http://
www.supermicro.com/products/.
Manual Organization
Chapter 1 describes the features, specications and performance of the motherboard, and
provides detailed information on the Q370/H310 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when installing the
processor, memory modules, and other hardware components into the system.
If you encounter any problems, see Chapter 3, which describes troubleshooting procedures
for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information on running
the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software program installation instructions.
Appendix C lists standardized warning statements in various languages.
Appendix D provides UEFI BIOS Recovery instructions.