52
Super X11SCQ/-L User's Manual
CMOS Clear
JBT1 is used to clear CMOS, which will also clear any passwords. Instead of pins, this jumper
consists of contact pads to prevent accidentally clearing the contents of CMOS.
To Clear CMOS
1. First power down the system and unplug the power cord(s).
2. Remove the cover of the chassis to access the motherboard.
3. Remove the onboard battery from the motherboard.
4. Short the CMOS pads with a metal object such as a small screwdriver for at least four
seconds.
5. Remove the screwdriver (or shorting device).
6. Replace the cover, reconnect the power cord(s), and power on the system.
Note: Clearing CMOS will also clear all passwords.
JBT1 contact pads
1. Clear CMOS
+
X11SCQ
REV:1.01
MAC CODE
BAR CODE
DESIGNED IN USA
BIOS
LICENSE
Intel
Q370/H310
JGP1
JSMB1
DIMMA1
DIMMB1
DIMMA2
DIMMB2
J23
COM3/4
COM5/6
MH12
MH11
MH9
CON1
JPW2
SP1
COM2
COM1
JSTBY1
JD1
FAN1
FAN3
FAN4
FAN2
JPT1
JAT1
JPME2
JWD1
JLED1
JPL2
JPAC1
JPL1
JPW1
JL1
I-SATA5
I-SATA2
I-SATA4
I-SATA1
I-SATA3
I-SATA0
JF1
JBT1
JSD1
JTPM1
J*
B3
LED3
LED1
EDP
CPU
AUDIO FP
USB4/5
USB6/7(3.1)
SLOT4
SLOT5
SLOT6
ON
PWR
X
LED
OH/FF
RST
NIC2 NIC1
HDD
LED
USB10/11(3.1)
LED
PWR
HD AUDIO
SLOT7
UNB NON-ECC DDR4 DIMM REQUIRED
ALWAYS POPULATE BLUE SOCKET FIRST
PCI-E M.2-M1
LAN2
USB2/3
USB8/9(3.1)
LAN1
HDMI/DP
DVI-D
CPU FAN
KB/MOUSE
USB0/1
J5
1
To Next Page
Loading...
