Supermicro X11SCQ-L - Page 75

Chapter 4: BIOS
75
Memory Scrambler
Use this feature to enable or disable memory scrambler support. The options are Dis-
able and Enable.
MRC Fast Boot
Use this feature to enable or disable fast path through the memory reference code. The
options are Disable and Enable.
Graphics Conguration
Graphics Conguration
• IGFX VBIOS Version
• IGFX GOP Version
Primary Display
Use this feature to select the primary video display. The options are Auto, IGFX, PEG,
and PCI.
Primary PEG
Use this feature to select which graphics device should be the the primary PEG. The
default is CPU SLOT7 PCI-E 3.0 X16.
Primary PCIE
Use this feature to select whether the device in SLOT4, SLOT5, or SLOT6 should be
the primary PCI-E graphics display. The options are Auto, PCH SLOT4 PCI-E 3.0 X4,
PCH SLOT5 PCI-E 3.0 X4, and PCH SOLT6 PCI-E 3.0 X1.
Internal Graphics
Select Auto to keep an internal graphics device installed on an expansion slot supported
by the CPU to be automatically enabled. The options are Auto, Disable, and Enable.
GTT Size
Use this feature to set the memory size to be used by the graphics translation table
(GTT). The options are 2MB, 4MB, and 8MB.