Supermicro X11SCQ-L - Page 92

X11SCQ/-L User's Manual
92
Graphics Mode Resolution
Use this feature to specify the resolution for the graphics mode. The options are Auto,
640x480, 800x600, 1024x768.

ACPI Settings
ACPI Sleep State
Use this feature to select the ACPI Sleep State that the system will enter into when the
suspend button is activated. The options are Suspend Disabled and S3 (Suspend to RAM).
WHEA Support
Select Enabled to support the Windows Hardware Error Architecture (WHEA) platform and
provide a common infrastructure for the system to handle hardware errors within the Windows
OS environment in order to reduce system crashes and enhance system recovery and health
monitoring. The options are Disabled and Enabled.
High Precision Event Timer
Select Enabled to activate the High Precision Event Timer (HPET) that produces periodic
interrupts at a much higher frequency than a Real-time Clock (RTC) does in synchronizing
multimedia streams, providing smooth playback and reducing the dependency on other
timestamp calculation devices, such as an x86 RDTSC Instruction embedded in the CPU.
The High Performance Event Timer is used to replace the 8254 Programmable Interval Timer.
The options are Disabled and Enabled.
Native PCIE Enable
Enable this feature to grant control of PCI Express Native hot plug, PCI Express Power
Management Events, and PCI Express Capability Structure Control. The options are Disabled
and Enabled.
Native ASPM
Select Enabled for the operating system to control the ASPM, or Disabled for the BIOS to
control the ASPM. The options are Auto, Enabled, and Disabled.
Headless Mode Support
Select Enabled for the system to function without a keyboard, mouse, or monitor. The options
are Disabled and Enabled.
Wake System from S5
Select Enabled for the system to wake from S5 on the hr:min:sec that is specied. The options
are Disabled and Enabled.