Supermicro X11SCQ-L - Page 95

Chapter 4: BIOS
95
PCH SLOT6 PCI-E 3.0 X1 OPROM (PCI-E 2.0 X1 in X11SCQ-L)
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
PCH SLOT5 PCI-E 3.0 X4 OPROM (PCI-E 2.0 X4 in X11SCQ-L)
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
PCH SLOT4 PCI-E 3.0 X4 OPROM (Not Available on X11SCQ-L)
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
PCI-E M.2-M1 OPROM (Not Available on X11SCQ-L)
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
Onboard LAN1 SUPPORT
Use this feature to select which rmware function to be loaded for LAN Port1 used for system
boot. The options are Disabled and Enabled.
Onboard LAN Option ROM Type
Use this feature to select which rmware type to be loaded for onboard LAN devices. The
options Legacy and EFI. Select Legacy to display and congure the Onboard LAN1 ~ LAN2
Option ROM features.
Onboard LAN1 Option ROM
Use this feature to select which rmware function to be loaded for LAN Port1 used for system
boot. The options are Disabled and PXE.
Onboard LAN2 Option ROM
Use this feature to select which rmware function to be loaded for LAN Port2 used for system
boot. The options are Disabled, PXE, and iSCSI.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unied Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If the feature above is set to Enabled, the next six features will be available for
conguration:
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.