Supermicro X11SCQ-L - Page 99

Chapter 4: BIOS
99
Intel® Ethernet Network Connection (7) I219-LM
NIC Conguration
Link Speed
Use this feature to change the link speed and duplex for the current port. The options are
Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps full.
Wake On LAN
Select enabled to wake the system with a magic packet. The options are Disabled and
Enabled.
Blink LEDs
This feature allows the user to specify the duration for LEDs to blink. The range is from 0 ~
15 seconds. The default setting is 0.
This section displays the following port information:
• UEFI Driver
• Adapter PBA
• Chip Type
• PCI Device ID
• PCI Address
Link Status
This feature displays the connection status for this network device.
• MAC Address
Driver Health
This submenu displays the health status for the following network drivers and controllers.
Intel® Gigabit 0.0.19 Healthy
Controller 9ab3e398 Child 0 Healthy
Intel® PRO/1000 6.7.05 PCI-E Healthy
Controller 9ab3f798 Child 0 Healthy
Intel® I210 Gigabit Network Connection Healthy