Super X11SCV-Q/-L User's Manual
90
XHCI Hand-off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The settings are Enabled and Disabled.
USB Mass Storage Driver Support
Select Enabled for USB mass storage device support. The options are Disabled and Enabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which in turn, will provide complete
legacy USB keyboard support for the operating systems that do not support legacy USB
devices. The options are Disabled and Enabled.
PCIe/PCI/PnP Conguration
Option ROM execution
Video
Use this feature to select the execution of the video OpROM. The options are Do not launch,
UEFI, and Legacy.
PCI PERR/SERR Support
Use this feature to enable or disable the runtime event for PCI errors. The options are
Disabled and Enabled.
Above 4G MMIO BIOS Assignment
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Disabled and Enabled.
BME DMA Mitigation
Enable this feature to help block DMA attacks. The options are Enable and Disable.
PCIe/PCI/PnP Conguration
CPU SLOT7 PCI-E 3.0 X16 OPROM
Use this feature to select which rmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
M.2:PCIE3.0x4 OPROM/M.2:PCIE3.0x1 CNVI OPROM
Use this feature to select which rmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
To Next Page
Loading...
