EasyManua.ls Logo

Supermicro X11SCV-Q - Page 93

Supermicro X11SCV-Q
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4: BIOS
93
Current Status Information
This feature displays the status of the TPM support on this motherboard.
TPM Enabled Status
TPM Active Status
TPM Owner Status
TXT Support
Intel TXT (Trusted Execution Technology) helps protect against software-based attacks and
ensures protection, condentiality and integrity of data stored or created on the system. Use
this feature to enable or disable TXT Support. The options are Disabled and Enabled.
*The features in the Trusted Computing section on this page and the next are
displayed if a TPM 2.0 module is detected:
TPM20 Device Found
Firmware Version
Vendor: IFX
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM support to enhance data integrity and network
security. Reboot the system for a change on this setting to take effect. The options are
Disabled and Enabled.
The following TPM information will be displayed:
Active PCR banks
Available PCR banks
*If the feature "Security Device Support" is enabled, the following features are available
for conguration:
SHA-1 PCR Bank
Use this feature to disable or enable the SHA-1 Platform Conguration Register (PCR) bank
for the installed TPM device. The options are Disabled and Enabled.
SHA256 PCR Bank
Use this feature to disable or enable the SHA256 Platform Conguration Register (PCR) bank
for the installed TPM device. The options are Disabled and Enabled.
Pending operation
Use this feature to schedule a TPM-related operation to be performed by a security device
for system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are None and TPM Clear.

Table of Contents

Related product manuals