Supermicro X11SCV-Q - Page 98

Super X11SCV-Q/-L User's Manual
98
*If Secure Boot Mode is set to Customized, Key Management features are available
for conguration:
CSM Support
This feature is for manufacturing debugging purposes.

Install Factory Default Keys
Select Yes to install all factory keys to the default settings. The options are Yes and No.
Key Management
Vendor Keys
Provision Factory Default keys
Select Enabled to install the default Secure Boot keys set by the manufacturer. The options
are Disabled and Enabled.
*If the feature above is set to Enabled, the next four features are available for
conguration:

Install Factory Default Keys
Select Yes to install all factory keys to the default settings. The options are Yes and No.

Reset to Setup Mode
Select Yes to delete all Secure Boot key databases and force the system to Setup Mode.
The options are Yes and No.
Save all Secure Boot variables
Use this feature to copy the NVRAM contents of the secure boot variables to a le.
Enroll E Image
This feature allows the image to run in Secure Boot mode.
Device Guard Ready
Remove 'UEFI CA' from DB
Use this feature to remove the Microsoft UEFI CA certicate from the database. The options
are Yes and No.

Restore DB defaults
Select Yes to restore all DBs to the default settings. The options are Yes and No.
Secure Boot variable | Size | Keys# | Key Source