51
Chapter 2: Installation
1
+
+
X11SCW-F
REV: 1.02
DESIGNED IN USA
IPMI CODE
MAC CODE
BIOS LICENSE
BAR CODE
ASpeed
AST2500
Intel
C246
J*
J*
LE6
JIPMB1
JSTBY1
I-SGPIO1
I-SGPIO2
JF1
JPI2C1
FAN1
FAN2
FAN3
FAN4
FAN5
FAN6
JL1
JD1
JPWR1
JPWR2
BT1
JBT1
JSD2
JSD1
SRW9
SRW8
SRW2
SRW3
SRW1
SRW4
J7
SP1
JTPM1
JSXB1B
JSXB1C
JSXB1A
JSXB2
JUIDB1
I-SATA2
I-SATA3
I-SATA6
I-SATA7
I-SATA4
I-SATA5
LEDM1
LEDEC2
LEDEC1
LE1
LEDPWR
JPME2
JPG1
JPL2
JWD1
JPL1
VGA
Intel
i210
CPU
22110
2280
2260
22110
2280
2260
M.2-P_2
M.2-H_1
USB4/5
USB9/10(3.1)
DIMMB2
DIMMB1
DIMMA2
DIMMA1
X
PWR
NMI
LED
1
NIC
HDD
OH
NIC
2
FF
FAIL
PWR
RST
JF1
ON
PWR
USB8(3.0)
USB2/3
USB0/1
LAN2
LAN1
USB6/7
(3.1)
IPMI_LAN
COM2
COM1
SATA Ports
The X11SCW-F has six SATA 3.0 ports (I-SATA2 ~ I-SATA7) supported by the Intel C246
chipset. These SATA ports support RAID 0, 1, 5, and 10. SATA ports provide serial-link signal
connections, which are faster than the connections of Parallel ATA.
Note: Supermicro SuperDOMs are yellow SATADOM connectors with power pins built
in and do not require separate external power cables. These connectors are backwards
compatible with non-Supermicro SATADOMS that require an external power supply.
65
43
1
1. I-SATA2
2. I-SATA3
3. I-SATA4
4. I-SATA5
5. I-SATA6
6. I-SATA7
7. PCI-E Only M.2 Slot
8. Hybrid (PCI-E and SATA)
M.2 Slot
2
M.2 Slot
The X11SCW-F motherboard has two M.2 slots. M.2 was formerly known as Next Generation
Form Factor (NGFF) and serves to replace mini PCI-E. M.2 allows for a variety of card sizes,
increased functionality, and spatial efciency. The hybrid M.2-H_1 slot supports PCI-E 3.0 x4
(32 Gb/s) SSD cards in a 2260/2280/2210 form factor or SATA 3.0, while the M.2-P_1 slot
only supports PCI-E 3.0 x4.
7 8
To Next Page
Loading...
