Supermicro X11SCZ-F/Q - Page 15

15
Chapter 1: Introduction
Motherboard Features
BIOS
• 256Mb SPI AMI BIOS
®
SM Flash UEFI BIOS
• ACPI 6.1, SMBIOS 3.1, UEFI 2.6 specication, PCI F/W 3.0, Plug-and-Play (PnP), SPI Dual/quad speed support, RTC
wakeup
Power Management
• Power button override mechanism
• Management Engine (ME)
• Power-on mode for AC recovery
Fan Control
• X11SCZ-F: Fan status monitoring with rmware 4-pin fan speed control via IPMI interface. Multi-fan speed control via
onboard BMC
• X11SCZ-Q: Multi-fan speed control via onboard Super I/O
System Health Monitoring
• Onboard voltage monitoring for +3.3V, +3.3V standby, +5V, +5V standby, +/-12V, VBAT, HT, Memory, PCH Temp., System
Temp., Memory Temp.
• CPU switching phase voltage regulator
• CPU Thermal Trip support
System Management
• Trusted Platform Module (TPM) support
• PECI (Platform Environment Control Interface) 3.1 support
• UID (Unit Identication)/Remote UID
• System resource alert via SuperDoctor® 5
• Watch Dog, NMI
LED Indicators
• Power/Suspend-state indicator LED
• UID/remote UID (X11SCZ-F only)
Dimensions
• 9.6" (L) x 9.6" (W) (243.84mm x 243.84mm)
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specications for proper CPU TDP sizing.
Note 2 (X11SCZ-F only): For IPMI conguration instructions, please refer to the
Embedded IPMI Conguration User's Guide available at http://www.supermicro.com/
support/manuals/.
Note 3 (X11SCZ-F only):: It is strongly recommended that you change BMC log-in
information upon initial system power-on. The manufacture default username is ADMIN
and the password is ADMIN. For proper BMC conguration, please refer to https://www.
supermicro.com/products/nfo/IPMI.cfm.