Supermicro X11SCZ-F/Q - Page 38

38
Super X11SCZ-F/Q User's Manual
OH/Fan Fail LED
20
NIC1 Activity LED
19
HDD LED
FP PWRLED
3.3V Stby
3.3V Stby
UID LED (X11SCZ-F only)
X
Ground
NMI
X
NIC2 Activity LED
3.3V Stby
3.3V Stby
Power Button
Reset Button
Reset
PWR
Ground
Ground
12
Power Fail LED (X11SCZ-F only)
3.3V (X11SCZ-F only)
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and the LED connection for LAN Port 2 is on pins 9 and 10. Attach NIC
LED cables to NIC1 and NIC2 LED indicators to display network activities. Refer to the table
below for pin denitions.
LAN1/LAN2 LED
Pin Denitions (JF1)
Pins Denition
9/11 +3.3V Stby
10/12 NIC Activity LED
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable here to show
hard drive activity status. Refer to the table below for pin denitions.
HDD LED
Pin Denitions (JF1)
Pins Denition
13 +3.3V Stby
14 HD LED
1. NIC1 Activity
2. NIC2 Activity
3. HDD LED
1
2
3