Supermicro X11SCZ-F/Q - Page 83

Chapter 4: BIOS
83
EDPC
Use this feature to enable or disable rootport extensions for Downstream Port Contain-
ment. The options are Disabled and Enabled.
PCIe Speed
Use this feature to select the PCI Express port speed. The options are Auto, Gen1,
Gen2, and Gen3.
PCIe PLL SSC
Use this feature to enable or disable PCIe PLL SSC. The options are Disabled and Enabled.

NCT6776 Super IO Conguration (available on X11SCZ-F)

NCT6116D Super IO Conguration (available on X11SCZ-Q)
The following Super IO information will display:
• Super IO Chip NCT6776
• Super IO Chip NCT6116D
Serial Port 1 Conguration
Serial Port 1
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This feature displays the status of a serial port specied by the user.
Change Settings
This feature species the base I/O port address and the Interrupt Request address of a
serial port specied by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=3F8h; IRQ=4;), (IO=3F8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
Serial Port 2 Conguration
Serial Port 2
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.