Super X11SPH-NCTPF/-NCTF User's Manual
100
ACPI Settings
WHEA Support
Select Enabled to support the Windows Hardware Error Architecture (WHEA) platform and
provide a common infrastructure for the system to handle hardware errors within the Windows
OS environment to reduce system crashes and to enhance system recovery and health
monitoring. The options are Disabled and Enabled.
High Precision Event Timer
Select Enabled to activate the High Precision Event Timer (HPET) that produces periodic
interrupts at a much higher frequency than a Real-time Clock (RTC) does in synchronizing
multimedia streams, providing smooth playback and reducing the dependency on other
timestamp calculation devices, such as an x86 RDTSC Instruction embedded in the CPU.
The High Performance Event Timer is used to replace the 8254 Programmable Interval Timer.
The options are Disabled and Enabled.
Trusted Computing
The X11SPH-NCTPF/-NCTF supports TPM 1.2 and 2.0. The following Trusted Platform
Module (TPM) information will display if a TPM 2.0 module is detected:
• Vendor Name
• Firmware Version
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM (Trusted Platform Module) support to enhance data
integrity and network security. Please reboot the system for a change on this setting to take
effect. The options are Disable and Enable.
• Active PCR Bank
• SHA256 PCR Bank
*If the item above is set to Enable, "SHA-1 PCR Bank" and "SHA256 PCR Bank" will
become available for conguration:
SHA-1 PCR Bank
Use this item to disable or enable the SHA-1 Platform Conguration Register (PCR) bank for
the installed TPM device. The options are Disabled and Enabled.
To Next Page
Loading...
