Supermicro X11SPH-NCTPF - DIMM Installation; DIMM Removal

35
Chapter 2: Installation
IPMI CODE
MAC CODE
SAS CODE
SAN MAC
X11SPH-NCTPF/-NCTF
REV:1.01
DESIGNED IN USA
1
1
1
1
1
1
1
1
1
Intel
C622
LSI
3008
Aspeed
AST2500
Inphi
CS4227
(-NCTPF)
Intel
X557
(-NCTF)
M.2 PCI-E 3.0 X4
DLE1
LEDSAS
JNVME1
JNVME2
JPWR1
JTPM1
JRK1
SP1
LEDBMC
JL1
JBT1
JSTBY1
JSD2
JPS1
JPME2 JWD1
JVRM1
JP4
JPG1
JIPMB1 JNVI2C1
FANB
FANA
FAN3FAN4 FAN2
FANC
CPU FAN1
FAN5
JD1
S-SGPIO1
JP2 JP3
S-SATA0
S-SATA1
JF1
JPWR2
JSD1
LEDPWR
USB2/3
I-SATA 4-7
I-SATA 0-3
L-SAS0-7
IPMI_LAN
COM2
USB11/12(3.0)
PCH SLOT2 PCI-E 3.0 X4(in x8)
CPU SLOT3 PCI-E 3.0 X8
CPU SLOT5 PCI-E 3.0 X8
CPU SLOT6 PCI-E 3.0 X16
USB4/5
USB6/7
USB8(3.0)
UID-SW
UID-LED
JF1
ON PWR
PS
FAIL
RST
UID LED
1
NIC
2
NICHDD
LED
X
PWR LED
NMI
DIMMC1 DIMMA1 DIMMB1
VGA
DIMMA2
JLAN1: LAN3/4
(-NCTF)
SFP1: LAN1/2
(-NCTPF)
USB9/10(3.0)
DIMMD1 DIMMD2
CPU
DIMMF1 DIMME1
USB0/1
COM1
JPI2C1
JOH1
1
BT1
DIMM Installation
1. Insert the desired number of DIMMs into
the memory slots in the following order:
DIMMA1, DIMMD1, DIMMB1, DIMME1,
DIMMC1, DIMMF1, DIMMA2, DIMMD2.
For best performance, please use the
memory modules of the same type and
speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
Release Tabs
Notches
Press both notches
straight down into
the memory slot.