Supermicro X11SPH-NCTPF - Page 14

14
Super X11SPH-NCTPF/-NCTF User's Manual
Connector Description
L-SAS0~7 Eight SAS 3.0 Ports
M.2 Slot M.2 PCI-E 3.0 x4 or SATA 3.0 Slot (Supports M-Key 2280)
S-SATA0, S-SATA1 SATA 3.0 Ports with SATA DOM Power
S-SGPIO1 Serial Link General Purpose I/O Connection Header
SLOT2 PCH PCI-E 3.0 x4 (in x8) Slot
SLOT3 CPU PCI-E 3.0 x8 Slot
SLOT5, SLOT6 CPU PCI-E 3.0 x8/x16 Slot (*Supports Auto Switch. See note.)
SP1 Internal Speaker/Buzzer
UID SW Unit Identier (UID) Switch
USB0/1 Back Panel Universal Serial Bus (USB) 2.0 Ports
USB2/3, USB4/5, USB6/7 Front Accessible USB 2.0 Headers
USB8 USB 3.0 Type-A Header
USB9/10 Back Panel USB 3.0 Ports
USB11/12 Front Accessible USB 3.0 Header
VGA VGA Port
Note: The X11SPH-NCTPF/-NCTF auto congures SLOT5 and SLOT6. If the user
populates SLOT5 and SLOT6, both slots will be congured as PCI-E 3.0 x8. If SLOT6
is populated with a PCI-E 3.0 x16 card with no population on SLOT5, SLOT6 will be
congured as PCI-E 3.0 x16. However, if SLOT6 is populated with a PCI-E 3.0 x16
card and SLOT5 is also populated, the PCI-E 3.0 x16 card will run on a PCI-E 3.0 x8
slot. This may decrease performance for SLOT6.