Supermicro X11SPH-NCTPF - Page 56

56
Super X11SPH-NCTPF/-NCTF User's Manual
IPMI CODE
MAC CODE
SAS CODE
SAN MAC
X11SPH-NCTPF/-NCTF
REV:1.01
DESIGNED IN USA
1
1
1
1
1
1
1
1
1
Intel
C622
LSI
3008
Aspeed
AST2500
Inphi
CS4227
(-NCTPF)
Intel
X557
(-NCTF)
M.2 PCI-E 3.0 X4
DLE1
LEDSAS
JNVME1
JNVME2
JPWR1
JTPM1
JRK1
SP1
LEDBMC
JL1
JBT1
JSTBY1
JSD2
JPS1
JPME2 JWD1
JVRM1
JP4
JPG1
JIPMB1 JNVI2C1
FANB
FANA
FAN3FAN4 FAN2
FANC
CPU FAN1
FAN5
JD1
S-SGPIO1
JP2 JP3
S-SATA0
S-SATA1
JF1
JPWR2
JSD1
LEDPWR
USB2/3
I-SATA 4-7
I-SATA 0-3
L-SAS0-7
IPMI_LAN
COM2
USB11/12(3.0)
PCH SLOT2 PCI-E 3.0 X4(in x8)
CPU SLOT3 PCI-E 3.0 X8
CPU SLOT5 PCI-E 3.0 X8
CPU SLOT6 PCI-E 3.0 X16
USB4/5
USB6/7
USB8(3.0)
UID-SW
UID-LED
JF1
ON PWR
PS
FAIL
RST
UID LED
1
NIC
2
NICHDD
LED
X
PWR LED
NMI
DIMMC1 DIMMA1 DIMMB1
VGA
DIMMA2
JLAN1: LAN3/4
(-NCTF)
SFP1: LAN1/2
(-NCTPF)
USB9/10(3.0)
DIMMD1 DIMMD2
CPU
DIMMF1 DIMME1
USB0/1
COM1
JPI2C1
JOH1
1
BT1
M.2 Slot
The X11SPH-NCTPF/-NCTF motherboard has one M.2 slot. M.2 was formerly Next Generation
Form Factor (NGFF) and serves to replace mini PCI-E. M.2 allows for a variety of card sizes,
increased functionality, and spatial efciency. The M.2 socket on the motherboard supports
PCI-E 3.0 x4 (32 Gb/s) SSD cards in the 2280 form factor. It can also support SATA devices.
Intel RAID Key Header
The JRK1 header allows the user to enable RAID functions. Refer to the table below for pin
denitions.
Overheat LED
Pin Denitions
Pin# Dention
1 GND
2 PU 3.3V Stdby
3
GND
4
PCH RAID KEY
1. Intel RAID Key
2. JNVME1
3. JNVME2
4. M.2 Slot
2
NVMe Connectors
Two NVM Express (NVMe) connectors are located at JNVME1 and JNVME2 on the
motherboard. Use these slots to attach high-speed PCI-E storage devices.
1
3
4