16
X11SRM-F/-VF User's Manual
Note: The table above is continued on the next page.
Motherboard Features
Peripheral Devices
• Two (2) USB 2.0 ports on the rear I/O panel (USB 0/1)
• Two (2) USB 3.0 ports on the rear I/O panel (USB 6/7)
• Two (2) front accessible USB 2.0 headers with two (2) USB connections (USB 2/3, USB 4/5)
• One (1) front accessible USB 3.0 header with two (2) USB connections (USB 8/9)
• One (1) USB 3.0 Type-A header (USB 10)
BIOS
• 256Mb AMI BIOS
®
SPI Flash UEFI BIOS
• ACPI 6.0, Plug and Play (PnP), SPI dual speed support, and SMBIOS 3.0 or later
Power Management
• ACPI power management
• Power button override mechanism
• Power-on mode for AC power recovery
• Power supply monitoring
System Health Monitoring
• Onboard voltage monitoring for +1.8V, +3.3V, +5V, +/-12V, +3.3V Stby, +5V Stby, VBAT, HT, memory, PCH temperature,
system temperature, and memory temperature
• 5 CPU switch phase voltage regulator
• CPU thermal trip support
• Platform Environment Control Interface (PECI)/TSI
Fan Control
• Fan status monitoring via IPMI connections
• Single cooling zone
• Low-noise fan speed control
• Six (6) 4-pin fan headers
System Management
• Trusted Platform Module (TPM) support
• SuperDoctor® 5
• Redundant power supply unit detection sensor
• Chassis intrusion header and detection
• Intel® Management Engine
LED Indicators
• CPU/system overheat LED
• Power/suspend-state indicator LED
• Fan failed LED
• UID/remote UID
• HDD activity LED
• LAN activity LED
To Next Page
Loading...
