Supermicro X11SRM-F - South Bridge

X11SRM-F/-VF User's Manual
82
South Bridge
The following USB information will display:
• USB Module Version
• USB Devices
Legacy USB Support
This feature enables support for USB 2.0 and older. The options are Enabled, Disabled,
and Auto.
XHCI Hand-off
When this feature is disabled, the motherboard will not support USB 3.0. The options are
Enabled and Disabled.
Port 60/64 Emulation
This feature allows legacy I/O support for USB devices like mice and keyboards. The options
are Enabled and Disabled.
RSA Support
Use this feature to enable Rack Scale Architecture (RSA) support. The options are Disabled
and Enabled.
SATA and RST Conguration
When this submenu is selected, the AMI BIOS automatically detects the presence of the
SATA devices that are supported by the Intel PCH chipset and displays the following items:
SATA Controller(s)
This item enables or disables the onboard SATA controller supported by the Intel PCH chipset.
The options are Enabled and Disabled.
Congure SATA as
Select AHCI to congure a SATA drive specied by the user as an AHCI drive. Select RAID
to congure a SATA drive specied by the user as a RAID drive. The options are AHCI and
RAID.
Aggressive Link Power Management
When this item is enabled, the SATA AHCI controller manages the power usage of the SATA
link. The controller will put the link in a low power mode during extended periods of I/O in-
activity, and will return the link to an active state when I/O activity resumes. The options are
Disabled and Enabled.