27
Chapter 2: Installation
5. Once they are aligned, carefully lower the CPU straight down into the socket. To avoid
damaging the CPU or socket, do not drop the CPU onto the socket, move it horizontally
or vertically, or rub it against the socket pins. Note that you can only install the CPU
inside the socket in one direction.
6. With the CPU inside the socket, inspect the four corners of the CPU to make sure that it
is properly installed.
7. Close the load plate with the CPU inside the socket. Lock the "Close 1st" lever rst,
then lock the "Open 1st" lever second. Gently push the load levers down to the lever
locks.
Push down and lock the
lever labeled "Close 1st"
Gently close
the load plate
1
2
OPEN 1st
OPEN 1st
Lever Lock
Lever Lock
Push down and
lock the lever
labeled "Open
1st"
3
4
OPEN 1st
To Next Page
Loading...
