Supermicro X11SSE-F - System Health Monitoring

13
Chapter 1: Introduction
Motherboard Features
BIOS
• 128Mb AMI BIOS® SPI Flash BIO
• ACPI 3.0 or later, USB keyboard, Plug-and-Play (PnP), BIOS Rescue Hot-Key, Real Time Clock Wakeup, Dual Boot_Block
support, PCI F/W 3.0, and SMBIOS 2.7 or later
Power Management
• ACPI Power Management
• Main switch override mechanism
• Power-on mode for AC power recovery
• Wake-On-LAN
System Health Monitoring
• Onboard voltage monitors for: +3.3V, +5V, +12V, +3.3V Stdby, 5.5V Stdby, VBAT, memory, PCH temperature, system
temperature, and memory temperature
• CPU 3-phase + GT 2-phase switching voltage regulator
• CPU thermal trip support
• PECI support
Fan Control
• Fan status monitoring with rmware 4-pin fan speed control via IPMI interface
• Low noise fan speed control
System Management
• IPMIView, SMCIPMITOOL, and IPMICFG
• SCM, SPM, SUM-Inband, and SUM-OOB
• PECI (Platform Environment Control Interface) 2.0 support
• UID (Unit Identication)/Remote UID
• System resource alert via SuperDoctor® 5
• SuperDoctor® 5, Watch Dog, NMI
• Server Platform Service
LED Indicators
• CPU/Overheating
• Power/suspend-state indicator
• Fan Failure
• UID/remote UID
• LAN activity
• HDD activity
Dimensions
• 4.6" x 11.7", proprietary, 8-layer