Supermicro X11SSE-F - Connectors

32
X11SSE-F User Manual
Universal Serial Bus (USB) Ports
There are two Universal Serial Bus 2.0 ports (USB0/1) supported by JKVM1 on the I/O back
panel and can be used to provide rear USB access. An additional USB 3.0 type "A" port
(USB2) is located on the motherboard. Cables are not included.
1
2
1. USB0/1 (via KVM)
2. USB2
BMC
Intel PCH
CPU
USB2 (3.0)
I-SATA6
JSD1
SW2
LED5 JUIDB1
LED6
MAC CODE
BAR CODE
BIOS
LICENSE
JPG1
JKVM1/VGA
USB0/1
BT1
JWD1
JPME2 JPME1
JTPM1
JBT1
CPU MICRO-LP PCI-E 3.0 X8
JPO1
J21
MICRO-LP
DIMMB2 DIMMB1 DIMMA2 DIMMA1
I-SATA0
X11SSE-F
Rev. 1.01
Type A USB2 (3.0)
Pin Denitions
Pin # Denition Pin # Denition
1 VBUS 5 SSRX-
2 USB_N 6 SSRX+
3 USB_P 7 GND
4 Ground 8 SSTX-
9 SSTX+
Back Panel USB0/1 (2.0)
Pin Denitions
Pin # Denition Pin # Denition
1 +5V 5 +5V
2 USB_N 6 USB_N
3 USB_P 7 USB_P
4 Ground 8 Ground
2.6 Connectors