Supermicro X11SSE-F - Motherboard Features; I;O Devices

12
X11SSE-F User Manual
Note: The table above is continued on the next page.
Motherboard Features
CPU
• Intel® Xeon® E3-1200 v5 and 6th Gen Core™ i3, Pentium and Celeron processors in an LGA1151 (H4) socket. 80W
max TDP.
Memory
• Four (4) DIMM slots support up to 64 GB of DDR4 unbuffered ECC VLP 2133/1866/1600 MHz memory
DIMM Size
• 16GB, 8GB, and 4GB, up to 64GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
• Intel® PCH C236
Expansion Slots
• One (1) CPU Micro-LP PCIe 3.0 x8 slot
• Two (2) NVMe PCIe 3.0 x4 slots through backplane
Network
• One (1) 1Gb dedicated management port via BPN
Baseboard Management Controller (BMC)
• ASpeed AST 2400 Baseboard Controller (BMC) supports IPMI 2.0
Graphics
• Graphics controller via ASpeed 2400 BMC
I/O Devices
• Serial (COM) Port • One (1) COM connector (through KVM connector)
• Video (VGA) Port • One (1) VGA connector (through KVM connector)
• SATA 3.0
• Five (5) SATA 3.0 connections through backplane (I-SATA1 ~ I-SATA5)
• One (1) SATA receptacle connector (I-SATA0)
• One (1) SuperDOM connector (I-SATA6)
•RAID (PCH) • RAID 0, 1, 5, and 10
Peripheral Devices
•Two (2) USB 2.0 ports (through KVM connector) (USB 0/1)
•One (1) USB 3.0 Type-A header (USB 2)
Motherboard Features