Supermicro X12DAi-N6 - Page 14

14
Super X12DAi-N6 User's Manual
Motherboard Features
Peripheral Devices
• One USB 3.1 port on the front/rear I/O panel
• Six USB 3.0 ports on the front/rear I/O panel
• One USB 3.2 Type-C Gen 2x1 port
BIOS
• 256Mb AMI BIOS
®
SPI Flash BIOS
• ACPI 6.0, Plug and Play (PnP), BIOS rescue hot-key, riser card auto detection support, and SMBIOS 3.0 or later
Power Management
• ACPI power management
• Power button override mechanism
• Power-on mode for AC power recovery
• Wake-on-LAN
• Power supply monitoring
System Health Monitoring
• 
+1.0V PCH, CPU temperature, VRM temperature, PCH temperature and system temperature
• 7+1 CPU switch phase voltage regulator
• CPU thermal trip support
• Platform Environment Control Interface (PECI)/TSI
Fan Control
• Fan status monitoring via BMC connections
• Single cooling zone
• Low-noise fan speed control
• Eight 4-pin fan headers
System Management
• Trusted Platform Module (TPM) support
• SuperDoctor® 5
• Chassis intrusion header and detection (Note: Please connect a cable from the Chassis Intrusion header at JD1 to the
chassis to receive an alert via BMC.)
• Server Platform Service
LED Indicators
• Power/suspend-state indicator LED
• Fan failed LED
• HDD activity LED
• M.2 activity LED
• LAN activity LED
Dimensions
• 12.01"(W) x 12.99"(L) (305 mm x 330 mm)