Chapter 4: BIOS
151
SMCI Security Erase Conguration
this section is selected, the following features will display:
• HDD Name: This feature displays the name of the HDD/SATA drive that is connected
• HDD Serial Number: This feature displays the serial number of the HDD/SATA device
• Estimated Time: This feature displays the estimate time needed to perform the selected
Security Erase features.
• HDD User Pwd (Password) Status: This feature indicates if a password has been set
settings on the HDD (SATA) device by using this SATA user password.
Security Function
security settings of the HDD/SATA device. Select Security Erase - Password to enter a SATA
user password to allow the user to erase the password and the contents previously stored
in the HDD/SATA device. Select Security Erase - Without Password to use the manufacturer
default password "111111111" as the SATA user password and allow the user to erase the
contents of the HDD/SATA device by using this default password. The options are Disabled,
Set Password, Security Erase-Password, and Security Erase-Without Password.
Password
SMCI Security Erase settings by using the SATA user password.
Lockdown Mode
Select Enabled to support Lockdown Mode which will prevent existing data or keys stored
security. The options are Enabled and Disabled.
To Next Page
Loading...
