Super X12DAi-N6 User's Manual
Power Conguration
Watch Dog Function
Select Enabled to allow the Watch Dog timer to reboot the system when it is inactive for more
than 5 minutes. The options are Enabled and Disabled.
If this feature is set to Enabled, the following feature will display:
Watch Dog Action (Available when "Watch Dog Function" is set to Enabled.)
This feature allows the user to determine how the watch dog function can be triggered. The
options are NMI and Reset.
Front USB Port(s)
Select Enabled (Dynamic) to allow or disallow this particular type of USB devices to be used
in the front USB ports without rebooting the system. The options are Enabled, Disabled, and
Enabled (Dynamic).
Rear USB Port(s)
Select Enabled (Dynamic) to allow or disallow this particular type of USB devices to be used
in the rear USB ports without rebooting the system. The options are Enabled, Disabled, and
Enabled (Dynamic).
EuP (Energy Using Product)
Use this feature to enable the European Union's Ecodesign Directive -- EuP (Energy Using
Product) standard. The options are Disabled and Enabled.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay Off for
power to be turned on after a power loss. Select Last State to allow the system to
and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
as the user presses the power button. The options are Instant O and 4 Seconds Override.
To Next Page
Loading...
