Supermicro X13DEG-OA - Chipset Configuration - North Bridge and Memory

Chapter 4: UEFI BIOS
113
SGXLEPUBKEYHASH2 (Available when both "SW Guard Extensions (SGX)" and
"SGXLEPUBKEYHASHx Write Enable" are set to Enabled)
Use this feature to enter the bytes 16-23 of SGX Launch Enclave Public Key Hash.
SGXLEPUBKEYHASH3 (Available when both "SW Guard Extensions (SGX)" and
"SGXLEPUBKEYHASHx Write Enable" are set to Enabled)
Use this feature to enter the bytes 24-31 of SGX Launch Enclave Public Key Hash.
SGX Auto MP Registration (Available when "SW Guard Extensions (SGX)" is set to
Enabled)
Use this feature to enable/disable SGX Auto Multi-Package Registration Agent (MPA) running
automatically at boot time. The options are Disabled and Enabled.
Chipset Conguration
Warning: Setting the wrong values in the following features may cause the system to malfunc-
tion.
North Bridge

Uncore Conguration
The following information is displayed.
• Number of CPU
• Current UPI Link Speed
• Current UPI Link Frequency
• Global MMIO Low Base / Limit
• Global MMIO High Base / Limit
• 
Degrade Precedence
Use this feature to select the degrading precedence option for Ultra Path Interconnect
(UPI) connections. Select Topology Precedent to degrade UPI features if system options

Topology Precedence and Feature Precedence.