22
Super X13DEG-OA User's Manual
2.2 Processor and Heatsink Installation
carrier assembly. This assembly will be then attached to the heatsink to form the processor
heatsink module (PHM) before being installed into the CPU socket. Before installation, be
sure to perform the following steps below:
• Please carefully follow the instructions given on the previous page to avoid ESD-related
damages.
• Unplug the AC power cords from all power supplies after shutting down the system.
• Check that the plastic protective cover is on the CPU socket, and none of the socket pins
are bent. If they are, contact your retailer.
• When handling the processor, avoid touching or placing direct pressure on the LGA lands
(gold contacts). Improper installation or socket misalignment can cause serious damage
to the processor or CPU socket, which may require manufacturer repairs.
• When installing the processor and heatsink, ensure a torque driver set to the correct force
is used for each screw.
• Thermal grease is pre-applied on a new heatsink. No additional thermal grease is needed.
• Refer to the Supermicro website for updates on processor and memory support.
•
The 4th Gen Intel Xeon Scalable Processor
Processor Top View
SP XCC
Max Series (HBM)
SP MCC
Note: The installation process is the same for both 4th and 5th Gen Intel Xeon Scal-
able processors. Please use the 4th Gen Intel Xeon Scalable processor installation
process as a reference.
To Next Page
Loading...
