Supermicro X13DEG-OA - Bmc

Chapter 4: UEFI BIOS
151
BMC Firmware Revision

BMC STATUS

System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging upon system boot. The options are Disabled
and Enabled.
Erasing Settings
Erase SEL
Select [Yes, On next reset] to erase all system event logs upon next system boot. Select
[Yes, On every reset] to erase all system event logs upon each system reboot. Select No
to keep all system event logs after each system reboot. The options are No, [Yes, On next
reset], and [Yes, On every reset].
4.5 BMC
