116
Super X13DEG-OA User's Manual
Enable ADR
Select Enable for Asynchronous DRAM Refresh (ADR) support to enhance memory
performance. The options are Disable and Enable.
Legacy ADR Mode (Available when "Enable ADR" is set to Enable)
Use this feature to support the Legacy ADR mode to enhance memory performance. In
controllers. The options are Disable, Enable, and Auto.
Memory Topology
This feature displays the information of onboard memory modules as detected by the
BIOS, for example:
P1-DIMMA1: 4800MT/s Micron SRx4 32GB RDIMM ~ P2-DIMMH2: 4800MT/s Micron
SRx4 32GB RDIMM
Page Policy
Page Policy
Use this feature to set your memory page policy. The options are Closed and Adaptive.
The Closed Page Policy is good for random memory access patterns. The Adaptive Page
Policy can reduce the average memory latency.
Memory RAS Conguration
(RAS) settings.
Mirror Mode (Available when "ADDDC Sparing" is set to Disabled)
in the system which will create a duplicate copy of data stored in the memory to increase
memory security, but it will reduce the memory capacity into half. The options are
Disabled, Full Mirror Mode, and Partial Mirror Mode.
UEFI ARM Mirror (Available when "ADDDC Sparing" is set to Disabled and
"Mirror Mode" is set to Disabled)
Range memory will be enabled upon system boot. This will create a duplicate copy of
data stored in the memory to increase memory security, but it will reduce the memory
capacity into half. The options are Disabled and Enabled.
ARM Mirror Percentage (Available when "UEFI ARM Mirror" is set to Enabled)
Use this feature to set the percentage of memory space to be used for UEFI ARM
mirroring for memory security enhancement. The default setting is 0.
To Next Page
Loading...
